Rapid determination of lead, cadmium and thallium in cements using electrothermal atomic absorption spectrometry with slurry sample introduction

 A method is proposed for the determination of Pb, Cd and Tl in cements by ETAAS. The samples are suspended in a medium containing 10% v/v ethanol and 1% v/v both conc. nitric and hydrofluoric acids and are directly introduced into the electrothermal atomizer. The drying stage is performed by programming a 400 °C temperature, a ramp time of 5 s and a hold time of 30 s on the power supply to the atomizer. No ashing step is used. Atomization is carried out at 2100, 1800 and 1700 °C for Pb, Cd and Tl, respectively. For Cd determination, ammonium dihydrogen phosphate is added to the suspension medium. No modifier other than hydrofluoric acid is required for the Pb and Tl determination. It is shown that the results obtained by using direct calibration with aqueous standards for five commercial samples agree with those found by means of the standard additions method. Received: 29 March 1996/Revised: 24 May 1996/Accepted: 30 May 1996     

Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.     

Optimization of a clean-up procedure for the determination of heterocyclic aromatic amines in urine by field-amplified sample injection-capillary electrophoresis-mass spectrometry

Heterocyclic amines (HAs), generated when proteinaceous food is cooked, are of special interest since they can be carcinogenic for humans. In this paper, the optimization of a clean-up procedure for the isolation and preconcentration of 15 heterocyclic amines in urine samples is described. The method proposed combines liquid extraction on a solid support of diatomaceous earth with solid-phase extraction in cartridges. Tests were performed on several cartridges containing graphitic carbon or mixed phases, i.e., combining reversed-phase and cation-exchange mechanism, and the best results were obtained with Oasis MCX. The optimized purification method was applied to the quantification of heterocyclic amines in hydrolyzed spiked human urine. The method was carried out by capillary electrophoresis (CE) coupled to mass spectrometry (MS) and applying field-amplified sample injection (FASI) as in-line preconcentration procedure. We obtained detection limits down to 0.3 ng/ml of urine and errors lower than 17%.     

Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

Confirmation method for the identification and determination of some organophosphorus and organochlorine pesticides in cocoa beans by gas chromatography-mass spectrometry

The main objective of this work is to develop a routine quality control method for pesticide residues in cocoa beans, using gas chromatography-mass spectrometry. The investigated pesticides, which are used to control pests in the growing of cacao, are: Acephate, Propoxur, HCH, Heptachlor, Fenitrothion, Pirimiphos-methyl, Aldrin, Dieldrin, pp'-DDE, op-DDE and DDT. Two extraction methods were tested. The first was based on strong attack by concentrated sulphuric acid and later extraction with n-hexane: the investigated residues were Acephate, HCH, Fenitrothion and DDT; recoveries were 68-95% and the detection limits 0.5-10 ppb. The second extraction method was based on the Universal Trace Residue Extractor (UNITREX), which consists of a distillation system for organophosphorus and organochlorine pesticides in fatty samples. The investigated residues were Heptachlor, Pirimiphos-methyl, Aldrin, Propoxur, Dieldrin, op-DDE and pp'-DDE; recoveries were 67-88% and the detection limits 1-10 ppb.     

Reaction of alkenes with hydrogen peroxide and sodium iodide: a nonenzymatic biogenic-like approach to iodohydrins

An efficient protocol to synthesize iodohydrins from alkenes is presented. Reactions were conducted in aqueous media using safe and readily available sodium iodide (the most abundant form of the element), and a highly convenient oxidant such as hydrogen peroxide. Addition of a protic acid triggers a faster and efficient process, a role formally related to that played by haloperoxidase enzymes in naturally occurring transformations. The successful application of these conditions to multigram scale preparations and over natural products derivatives is also discussed.     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Unexpected ferromagnetic interaction in a new tetranuclear copper(II) complex: synthesis, crystal structure, magnetic properties, and theoretical studies

The new tetranuclear carbonate complex [Cu2L)2(CO3)] x 8H2O (1 x 8H2O) (H3L = (2-(2-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) has been obtained by two different synthetic routes and fully characterized. Recrystallization of 1 x 8H2O in methanol yields single crystals of {[(Cu2L)2(CO3)]}2 x 12H2O (1 x 6H2O), suitable for X-ray diffraction studies. The crystal structure of 1 x 6H2O shows two crystallographically different tetranuclear molecules in the asymmetric unit, 1a and 1b. Both molecules can be understood as self-assembled from two dinuclear [Cu2L]+ cations, joined by a mu4-eta(2):eta(1):eta(1) carbonate ligand. The copper atoms of each crystallographically different [(Cu2L)2(CO3)] molecule present miscellaneous coordination polyhedra: in both 1a and 1b, two metal centers are in square pyramidal environments, one displays a square planar chromophore and the other one has a geometry that can be considered as an intermediate between square pyramid and trigonal bipyramid. Magnetic studies reveal net intramolecular ferromagnetic coupling between the metal atoms. Density functional calculations allow the assignment of the different magnetic coupling constants and explain the unexpected ferromagnetic behavior, because of the presence of an unusual NCN bridging moiety and countercomplementarity of the phenoxo (or carbonate) and NCN bridges.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

Two New Antiferromagnetic Nickel(II) Complexes Bridged by Azido Ligands in the Cis Position. Effect of the Counteranion on the Crystal Structure and Magnetic Properties

Two new nickel(II) end-to-end azido-bridged compounds, cis-catena-[NiL(2)(&mgr;-N(3))](n)()(ClO(4))(n)().nH(2)O (1) and [Ni(2)L(4)(&mgr;-N(3))(2)](PF(6))(2) (2), were synthesized and characterized; L is 2-(aminoethyl)pyridine. The crystal structures of 1 and 2 were solved. Complex 1: monoclinic system, space group P2(1)/a, a = 8.637(2) ?, b = 18.9995(7) ?, c = 12.3093(7) ?, beta = 105.92(2) degrees, Z = 4. Complex 2: triclinic system, space group P&onemacr;, a = 9.139(7) ?, b = 10.124(3) ?, c = 12.024(2) ?, alpha = 70.407(14) degrees, beta = 84.19(2) degrees, gamma = 67.67(4) degrees, Z = 1. In the two complexes the nickel atom is situated in a similarly distorted octahedral environment. The two complexes are different; 1 is a one-dimensional helicoidal complex with the two L ligands and the two end-to-end azido bridges in a cis arrangement while complex 2 is a dinuclear system with two end-to-end azido bridges, indicating the extreme importance of the counteranion present (ClO(4)(-) for 1 and PF(6)(-) for 2). The magnetic properties of the two compounds were studied by susceptibility measurements vs temperature. The chi(M) vs T plot for 1 shows the shape for a weakly antiferromagnetically coupled nickel(II) one-dimensional complex without a maximum until 4 K. In contrast, for complex 2 the shape of the chi(M) vs T curve shows a maximum near 40 K, indicating medium antiferromagnetic coupling. From the spin Hamiltonian -J(ij)()S(i)()S(j)(), J values for 1 and 2 were less than -1 and -29.1 cm(-)(1), respectively. The magnetic behavior for 1 and 2 may be explained in terms of the overlap between magnetic orbitals, taking into account the torsion of the Ni(II) atoms and azido-bridging ligands in the two structures.